Enjoying the Ride Since 1989

Splined Bottom Bracket Socket

Home > Products > Tools > Pedal Crank and Bottom Bracket > Splined Bottom Bracket Socket

right

Item #: 6460201

Price: $18.00

Splined Bottom Bracket Socket

Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups

Made from heat-treated tool steel for strength and lasting performance.
Professional quality, precision sized for the perfect fit.
Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups.
Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, a square 1/2″ drive, or in a bench vise.

Details

Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The Splined Bottom Bracket Socket is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 1/2″ drive, or in a bench vise. For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. Backed by Pedro's lifetime warranty.

Usage Instructions

Splined Bottom Bracket Socket Instructions

FAQs

Splined BB Socket

How do I know which bottom bracket tool I need?

The following provides a general overview of our bottom bracket tools. If you still are not sure, contact us and we’ll help you choose the right tool. Flat Wrenches: Bottom Bracket Wrench, Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups including Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King®, and Phil Wood® outboard bearing. Also fits disc brake rotor lockrings with 16 external notches. NOTE: Will fit Shimano TL-FC24 and TL-FC25 adapters. Bottom Bracket Wrench, Shimano 16-Notch X 41mm: New for 2015. Fits Shimano® BBR60 (Ultegra 11-speed 6800 Series) and BB-MT800 (DEORE XT M8000 Series ) bottom brackets. Bottom Bracket Wrench, Shimano 16-Notch X 39mm: New for 2015. Fits Shimano® XTR BB93 and Dura Ace BB9000 bottom brackets. Bottom Bracket Wrench, Campagnolo 6-Notch: Fits Campagnolo® 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets for the following: Veloce®, Xenon®, Mirage®, Daytona®, and Avanti®. Bottom Bracket Wrench – Shimano 6-Notch, fits the lockring used on Dura Ace® 7700 and XTR® 950 Bottom Brackets and many other lockrings. Bottom Bracket Wrench – Shimano 8-Notch: Fits 8-Notch Shimano® Octalink and ISIS Drive® Bottom Bracket Cups. Socket Tools: External Bottom Bracket Socket: Fits 16-notch, 44mm diameter external bearing bottom bracket cups including Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King®, and Phil Wood® outboard bearing. NOTE: Will not fit Shimano TL-FC24 and TL-FC25 adapters. Splined Bottom Bracket Socket: Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Also fits many square taper bottom brackets. Campy BB and Cassette Socket: Fits all Campagnolo® cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. Press Fit Bottom Bracket Tools: Headset & Bearing Press: Compatible with all press-fit headsets and press fit bottom brackets*. Bottom Bracket Bushing Set: Includes ten precision-machined bushings in 6 sizes covering installation of all road, mountain, and bmx press-fit bottom brackets cups and bearings, plus a BB Bushing Spacer for enhanced flexibility, speed, and alignment. Bushings and spacer designed for use with Pedro’s Headset & Bearing Press ensuring precise and accurate installation. Inner diameter of 18.4mm (14mm for 19-37 and 19-41) may fit onto other presses. *Please refer to the Headset & Bearing Press User Guide for suggested press setup for different types of headsets and press fit bottom brackets. Removal Tools: We do not currently offer tools for removal of press fit bottom brackets.

Which bottom bracket spindles are compatible with the BB Socket Holder?

The Pedro’s BB Socket Holder is designed to work with the follow bottom bracket spindles:

-Bottom brackets which have an M8 internal spindle thread. Most square taper bottom brackets have this size internal thread.

-Bottom brackets which have an M15 internal thread. This includes the more common ISIS Standard bottom brackets with M15 spindle thread and any other spindle with M15 internal thread.

The new BB Socket Holder II, introduced Spring 2018, will fit the above bottom bracket spindles and adds the following:

-Bottom brackets which have an M12 internal thread. This includes less common ISIS Standard bottom brackets with M12 spindle thread and any other spindle with M12 internal thread.

If you are unsure if the tool will fit your bottom bracket, please contact us with information about your bottom bracket and/or crankset.

Submit your question about a Pedro’s product: